Surface Finishing
The top surface is levelled and finished smoothly using hand tools to keep the pole's section and length true, and the holes and notches that carry the fencing wires are formed in each pole.
Compaction
Concrete is compacted using needle vibrators or table vibrators to remove air voids and ensure dense and uniform structure.
Concrete Mixing
Concrete is prepared using cement, fine aggregates, coarse aggregates, and water in the specified ratio to achieve the required strength.
Reinforcement Placement
High-tension steel wires are laid along each mould and stretched to the specified tension, so the finished pole is pre-stressed and resists bending.
Mould Preparation
Long steel pole moulds are thoroughly cleaned and coated with shuttering oil, so each pole comes out cleanly with straight edges.